Open 24/7 · Houston, TX

Faucet Repair in Houston, TX

Faucet repair in Houston, TX replaces the worn cartridge, washer or seat inside a dripping tap, so most faucets do not need to be thrown away. Call any hour, describe the tap and ask about same-day service.

(409) 410-0007

Call nowA person answers. Same-day service is available.

Name the faucetKitchen, bath, tub, outdoor or utility.
Describe the faultDrip, spray, weak flow or a loose handle.
Fix and testThe worn part is replaced and the tap is run.

Jobs we take calls for

Faucet repair in Houston: related fixtures

A tap problem sometimes belongs to the fixture next to it. These pages cover the neighbors.

Garbage disposal repair in Houston

The unit under the same kitchen sink.

Garbage disposal repair in Houston details →

Shower repair

Valves and diverters in the shower.

Shower repair details →

Toilet repair

Fill valves and flappers.

Toilet repair details →

Low water pressure in Houston

When more than one tap runs weak.

Low water pressure in Houston details →

Start here

Which faucet fault do you have in Houston?

Match the card to the tap. The fixture and the fault point to the part.

A kitchen faucet that drips from the spout after you shut it offA worn cartridge or seat lets a thin stream through. Water in the cabinet below may follow if the hose connections are loose too.Kitchen faucets A pull-down sprayer that will not retractA kinked hose or a stuck weight keeps the spray head from seating, and the hose can leak under the sink.Pull-down hoses A bathroom faucet with weak flow on one sideScale clogs the aerator or a cartridge port, so the hot or cold stream shrinks.Scale White crust around the base of a faucetA slow leak under the handle leaves minerals as the water evaporates.Handle leaks A tub spout that keeps running when the shower is onThe diverter inside the spout is worn, so water escapes the shower head.Tub and shower An outdoor hose bib that drips behind the handleThe packing nut or washer is worn. In a slab house the leak can run along the wall.Hose bibs A utility or laundry sink faucet that sprays sidewaysA cracked spout or a clogged aerator splits the stream.Utility sinks Water spraying under the sink where the supply line meets the faucetShut the angle stop and call. A failed supply line floods a cabinet quickly.Emergency plumber in Houston

Reasons to call

Why one call covers faucet repair in Houston

Small jobs still need the right part. One call identifies the faucet and sets the visit.

Open 24/7A spray under the sink is answered at night.
Same-day service is availableSay whether water is spraying or dripping.
A person answersDescribe the tap and hear how to stop the water.
All plumbing jobs on one numberA bad shut-off valve or supply line is the same call.
One call, no formsNo form to complete over a wet cabinet.

Compared

Faucet repair in Houston or a do-it-yourself try

A faucet is within reach of a handy owner, but not always. This table compares.

	UsGalveston Bay Plumbing	vsThe usual local shop
Availability	The line is open at nightLeaks do not wait for store hours.	A hardware store that closes early
Reaching someone	A person asks about the brand and the faultThat points to the part.	A video and a guess
How soon	Same-day service is availableA drip wastes water and stains.	Waiting for a weekend
Jobs handled	Faucet, valve and supply line on one numberNo second call.	One part at a time
Local knowledge	Houston’s mineral-bearing waterScale is part of the diagnosis.	A generic diagnosis
Price clarity	The call explains what moves the priceAsk about pricing when you call.	Parts that do not fit

Typical patterns only; each company works differently.

From ring to repair

How a faucet repair visit in Houston goes

The order below holds for kitchen, bath and utility taps.

Describe the tap
Brand, type and the fault.
Shut off and open
The water is cut and the faucet is taken apart.
Replace the worn part
Cartridge, seat, washer or O-ring.
Run and check
Hot, cold, flow and leaks are tested.

Pricing

What shapes the price of faucet repair in Houston

A drip can be a small job or a big one. These are the drivers.

Faucet type

Single-handle cartridges, two-handle valves and pull-down units differ. Ask about pricing when you call.

Part availability

A common cartridge is simple, a rare one takes longer.

Shut-off condition

A stuck angle stop adds work.

Supply lines

Old braided lines are worth replacing during the visit.

Access

A tight vanity or a wall-mounted valve takes more time.

Have these ready for the call

Which faucet and which room
Brand name if visible
What the fault looks like
Whether the angle stop works

Ask about pricing when you call.

Call now, any hour(409) 410-0007

Kitchens

Kitchen faucets and pull-down hoses in Houston apartments and starter homes

Where the drip comes from

A kitchen faucet takes the hardest use in the home. A single-handle model has a cartridge that wears with every swing of the lever. A drip from the spout points to the cartridge. A drip from the base points to O-rings. A leak below the sink points to supply lines or the hose connections. Each is a different part, and the plumber matches the symptom to it.

A pull-down sprayer adds a hose and a weight. If the head will not retract, the hose may be kinked, the weight may be stuck or the hose may be leaking where it joins. Rental kitchens see this often, since fixtures are used by many tenants.

Where and what

Typical kitchen faucet leaks.
Where it leaks	Part	Fix
From the spout	Cartridge or seat	Replace the cartridge
At the base of the spout	O-rings	Replace the O-rings
Under the handle	Handle seal	Tighten or replace
In the cabinet	Supply line or hose connection	Replace the line
From the sprayer head	Hose or head seal	Replace the hose or head

Kitchen leaks

The cabinet underneath

Open the cabinet and look. A damp cabinet floor, a rusted supply line or a water stain on the underside of the counter points to a slow leak. Empty the cabinet before the plumber arrives. Check the angle stops: if they turn, you can cut water to the faucet without shutting the house down.

Under the sink

Clear the cabinetSo the plumber can reach the valves.
Turn the angle stopsClockwise to close.
Look for rustOn the lines and the valves.
Dry the baseA damp base hides a leak.

Hard water

Scale at the aerator and the cartridge: what Houston’s water leaves behind

The city’s own figures

In its 2025 water quality report, the city lists main-system hardness averaging about 7.9 grains per gallon, with a spread of 2.5 up to 13.4 across test points. A tap in one part of town may run softer or harder than that, so ask your water provider about your address. Moderately hard water leaves a white crust on fixtures and clogs the small holes in an aerator.

That crust shrinks the stream, sprays it sideways and can lock a cartridge. Soaking an aerator in vinegar can clear light scale. A heavy build-up inside the faucet needs the cartridge replaced.

From stream to handle

How minerals affect a faucet.
Symptom	Scale cause	Remedy
Weak stream from one tap	Clogged aerator	Clean or replace the aerator
Spray goes sideways	Partial block in aerator holes	Soak and brush
Handle feels gritty	Mineral build-up in the cartridge	Replace the cartridge
White crust at the base	Slow leak that evaporates	Replace O-rings

Scale effects

When a softener makes sense

If scale keeps returning on every fixture in the house, treating the water at the source may help. See water softener installation in Houston and water filtration in Houston for options.

Treating the supply

Simplified. Treatment at the main reduces scale at every tap.

Bath and shower

Tub spouts, shower valves and bathroom lavatory taps

The diverter and the cartridge

A tub spout with a lift knob or a pull-up diverter sends water to the shower head. When the diverter wears, water falls from the spout while the shower runs. A shower valve behind the wall has a cartridge that controls both flow and temperature. If the temperature drifts or the handle is stiff, the cartridge is worn.

A bathroom lavatory faucet is simpler. Widespread designs have separate hot and cold handles, each with its own cartridge. Single-handle versions combine them. See shower repair for work on the valve behind the wall.

Fault and part

Bath faucet faults.
Fixture	Common fault	Part
Tub spout	Water keeps falling during the shower	Diverter
Shower valve	Temperature drifts, stiff handle	Cartridge
Widespread lavatory	Drips from the spout	One cartridge or seat
Single-handle lavatory	Weak hot water	Cartridge or aerator

Bath faucets

Outdoors

Hose bibs, humid air and the occasional freeze

The hose bib that drips behind the handle

An outdoor tap works hard in a hot, humid climate. A worn washer or packing nut lets water seep past the stem. Humid air can corrode steel parts and tarnish brass. Freezes in Houston are occasional rather than constant, and a bib with a worn washer can be caught off guard when one arrives.

A slow drip is easy to ignore, but it adds to the water bill and can soak the wall behind it. Check for a damp spot on the interior wall opposite the tap. A vacuum breaker on the bib protects the supply from backflow; see backflow testing in Houston.

Four outdoor tap steps

Tighten the nut
A quarter turn on the packing nut may stop it.
Replace the washer
A small part that often cures it.
Add a breaker
Screw-on vacuum breaker.
Wrap for a freeze
Insulate on cold nights.

Utility sinks

Laundry, garage and bar sinks: the taps nobody checks

Taps with the least attention

A utility sink in a garage or laundry room goes weeks without use and then gets hard use. A bar sink in a finished room is the same. Their faucets are often basic, and their shut-offs seldom turned. When one fails, the corroded shut-off can be harder to deal with than the faucet. A plumber can replace the faucet and the shut-off in one visit.

Landlords can check these on turnover. Operate every valve and look for dust, rust and drips. A walk-through finds problems before a tenant does.

A turnover check

Operate each tapHot, cold and the mixing.
Turn each shut-offA stiff valve will fail later.
Check the drainSlow drains hint at other trouble.
Look for crustA white crust means a slow leak.

Repair or replace

When a new faucet beats a repair

Choosing between the two

Repair fits when the faucet body is sound and only an inner part is worn. Replacement fits when the body is pitted, parts are not made or a new style is wanted. A plumber can tell by looking and by checking whether the cartridge is still sold. Replacement during a visit can add new supply lines and shut-offs at the same time.

A choice

Repair or replace.
Situation	Choice	Reason
Drip from a sound faucet	Repair	A cartridge is cheaper than a faucet
Pitted or corroded body	Replace	Corrosion will return
Parts discontinued	Replace	No repair is possible
Wanting a pull-down or touchless	Replace	A different fixture

Repair or replace

What to do before the visit

Take a photo of the faucet and any label. Note the brand. Clear the area under the sink. Mention any other plumbing trouble, since the plumber can check a disposal or a toilet on the same visit. Read faucet repair for the general process, and how to find a water leak in your house if a stain has no clear source.

Faucet parts

Simplified. A faucet has a cartridge, a spout and shut-offs.

Questions

Questions about faucet repair in Houston

Why does my faucet drip even after I turn it off tight?

A faucet drips when a worn cartridge, washer or valve seat lets water slip past. Turning the handle harder usually wears it faster. Faucet repair in Houston, TX replaces the worn part, and in many cases the same faucet is saved without a new fixture.

Should I repair or replace a leaking Houston bathroom faucet?

Repair when the faucet is sound and only an inner part is worn. Replace when the body is corroded, parts are no longer made or you want a different style. A plumber can check which parts are available before you decide.

How much does faucet repair in Houston cost?

Price depends on the faucet type, the part needed, the access under the sink and whether a shut-off valve also needs work. A simple cartridge swap is smaller than a rebuild with new supply lines. Ask about pricing when you call and give the faucet brand if you know it.

Why do faucet repair prices in Houston vary from one home to the next?

Faucet brand, part availability and access to the shut-off valves drive the difference. A faucet with a common cartridge is quicker than a rare design. Corroded shut-offs add work. Ask about pricing when you call.

Does Houston’s hard water cause faucet problems?

It can. The city’s 2025 water quality report puts the main system’s average at roughly 7.9 grains per gallon, and individual readings swung widely around that. Check your bill or ask your water provider about your own address. Minerals clog aerators and wear seals over time, so a faucet on harder water tends to need attention sooner.

Can I get same-day faucet repair in Houston?

Same-day service is available in Houston, and the line is open 24/7. Say whether the faucet is running, dripping or spraying under the sink. A leak under a sink is treated as urgent; a slow drip takes a regular slot.

How do I stop a running faucet in my Houston home right now?

Turn the angle stop under the sink clockwise to cut the water to that faucet. If there is no stop or it does not turn, close the main water valve. Place a bucket under any leak, then call.

Can a faucet repair fix low flow from one tap?

Often yes. Scale in the aerator or a clogged cartridge port is the usual cause. Cleaning or replacing the aerator may be enough. If the flow stays weak, the cartridge or supply line may need work. Low water pressure in Houston covers house-wide cases.

Is a leaking outdoor hose bib in Houston urgent?

A drip is not an emergency, but a leak behind the wall can soak framing and add to the water bill. Turn off the interior shut-off if there is one. Freezes are occasional in Houston, and a bib with a worn washer can crack when it does.

Can landlords in Houston ask for faucet repair between tenants?

Yes. A turnover is a good time to check every faucet for drips, loose handles, slow aerators and corroded shut-offs. A plumber can do a walk-through and list repairs. See plumbing repair in Houston for broader work.

What parts of a faucet wear out first?

Cartridges, washers, O-rings, aerators and supply lines wear first, because they move or sit under constant water pressure. Handles and spouts rarely fail. A plumber replaces the wearing parts, and the faucet works like new if the body is sound and parts are still sold.

Guides

Guides for leaks and shut-offs

Need faucet repair in Houston?

Tell us which tap and what it does. A person picks up, and same-day service is available.